Jump To:
Jump To:
THE FOX DPX2 PERFORMANCE ELITE SHOCK
With so many amazing shocks on the market today, we determined (after much testing) that the Fox DPX2 shock was the perfect fit for the Druid. Regardless, to maximize performance, it is critical to spend some time correctly setting your shock up for your weight and riding style. Let’s get started.
STEP 1
Turn the 3-position High Speed Compression lever to the fully OPEN mode.
STEP 2 (PERFORMANCE ELITE ONLY)
Using a 3mm allen key, turn the Low Speed Compression (LSC) adjuster all the way to the closed (full clockwise) position. You will run this almost fully open and you can reference the chart below for a base starting point. The recommended settings are counted from the closed position as the starting point.
STEP 3
To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Druid, we recommend 35% sag (or 19mm of shaft insertion). Please reference the chart below for your recommended [air pressure] starting point in PSI.
As you fine tune the way your Druid feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.
STEP 4
To optimize performance further, turn the [red] Rebound adjuster all the way to the closed (full clockwise) position. You will run this almost fully open/ fast as well.
Please reference the chart below for your starting points. Again, the recommended settings are counted from the closed (clockwise towards Slow) position.
| Rider Weight (lbs) | Shock Air Pressure (psi) | 3-Position Lever | “OPEN” Mode Adjust (LSC) | Rebound |
| 120-130 | 115-125 | OPEN | 10 | 13 |
| 130-140 | 125-135 | OPEN | 10 | 13 |
| 140-150 | 130-140 | OPEN | 10 | 13 |
| 150-160 | 140-150 | OPEN | 10 | 12 |
| 160-170 | 150-160 | OPEN | 10 | 12 |
| 170-180 | 160-170 | OPEN | 10 | 12 |
| 180-190 | 170-180 | OPEN | 10 | 11 |
| 190-200 | 180-190 | OPEN | 10 | 11 |
| 200-210 | 190-200 | OPEN | 9 | 10 |
| 210-220 | 200-210 | OPEN | 9 | 10 |
| 220-230 | 205-215 | OPEN | 9 | 9 |
| 230-240 | 215-225 | OPEN | 8 | 8 |
| 240-250 | 225-234 | OPEN | 8 | 6 |
*The DPX2 comes with a 0.4 volume reducer in the air canister.
*OPEN Mode Adjust (LSC) for Performance Elite only
*For more information on the Fox DPX2 shock.
THE FOX FLOAT X PERFORMANCE ELITE SHOCK
STEP 1
Turn the 2-position Compression lever to the fully OPEN mode (counter-clockwise).
STEP 2
To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Druid, we recommend 35% sag (or 19mm of shaft insertion). Please reference the chart below for your recommended [air pressure] starting point in PSI.
As you fine tune the way your Druid feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.
STEP 3
Turn the [red] Rebound adjuster and the [blue] Compression adjuster all the way to the closed (full clock- wise) position.
The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings. Conveniently the Float X has numbers on the dials that refer to how many clicks you are from closed.
| Rider Weight (lbs) | Shock Air Pressure (psi) | 2-Position Lever | Low Speed Compression (LSC) | Rebound (LSR) |
| 120-130 | 90 | OPEN | 11 | 14 |
| 130-140 | 100 | OPEN | 10 | 13 |
| 140-150 | 110 | OPEN | 9 | 12 |
| 150-160 | 120 | OPEN | 8 | 11 |
| 160-170 | 130 | OPEN | 7 | 10 |
| 170-180 | 140 | OPEN | 6 | 9 |
| 180-190 | 150 | OPEN | 6 | 9 |
| 190-200 | 160 | OPEN | 5 | 8 |
| 200-210 | 170 | OPEN | 5 | 7 |
| 210-220 | 180 | OPEN | 4 | 6 |
| 220-230 | 190 | OPEN | 4 | 5 |
| 230-240 | 200 | OPEN | 4 | 5 |
| 240-250 | 210 | OPEN | 3 | 4 |
– Tune: CL RL
– The Float X comes with a 0.4 volume reducer in the air canister.
– For more information on the Fox Float X shock.
THE ROCKSHOX SUPER DELUXE ULTIMATE SHOCK
STEP 1
Turn the lock-out lever to the fully OPEN position (pointing towards the shock body).
STEP 2
To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Druid, we recommend 35% sag (or 19mm of shaft insertion). Please reference the chart below for your recommended [air pressure] starting point in PSI.
As you fine tune the way your Druid feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.
STEP 3
Turn the [red] Rebound adjuster and the [black] Compression (LSC) adjuster all the way to the closed (full clockwise) position. Note that the rebound adjuster can get stiffer as you close it. For reference there should be 10 clicks from open.
The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings. You will notice that this shock is run with open/fast for the majority of rider weights.
| Rider Weight (lbs) | Shock Air Pressure (psi) | Low Speed Compression (LSC) | Rebound (LSR) |
| 120-130 | 80 | 10 | 10 |
| 130-140 | 90 | 10 | 10 |
| 140-150 | 100 | 10 | 10 |
| 150-160 | 110 | 9 | 10 |
| 160-170 | 120 | 9 | 9 |
| 170-180 | 130 | 8 | 9 |
| 180-190 | 140 | 8 | 9 |
| 190-200 | 150 | 7 | 8 |
| 200-210 | 160 | 7 | 8 |
| 210-220 | 170 | 7 | 8 |
| 220-230 | 180 | 6 | 7 |
| 230-240 | 190 | 6 | 7 |
| 240-250 | 200 | 6 | 6 |
– Tune: LLC
– The Super Deluxe comes with 1 volume reducer in the air canister.
– For more information on the Super Deluxe Ultimate .
THE OHLINS TTX2AIR SHOCK
This shock does NOT fit on size Small or Medium Druid frames
STEP 1
Turn the HSC lever to the fully OPEN position [counter-clockwise].
STEP 2
To set the sag, push the shock o-ring all the way to the shock body and carefully sit on the bike wearing your riding kit and measure how far it has moved. For the Druid, we recommend 35% sag (or 19mm of shaft insertion). Please reference the chart below for your recommended [air pressure] starting point in PSI.
As you fine tune the way your Druid feels on the trail, we’d recommend making small and incremental adjustments of 2 PSI. Please use the compact digital shock pump (this was designed to fit into most back and hip packs) that came with your bike to make these adjustments on the trail.
STEP 3
Using a 3mm hex turn the [gold] Rebound adjuster and the [blue] Compression (LSC) adjuster all the way to the closed (full clockwise) position.
The recommended settings as shown below are clicks counted from closed—use this chart to determine your baseline settings.
| Rider Weight (lbs) | Shock Air Pressure (psi) | High Speed Compression (HSC) | Low Speed Compression (LSC) | Rebound (LSR) |
| 150 – 160 | 135 | OPEN | 10 | 11 |
| 160 – 170 | 145 | OPEN | 10 | 10 |
| 170 – 180 | 155 | OPEN | 9 | 9 |
| 180 – 190 | 165 | OPEN | 9 | 8 |
| 190 – 200 | 175 | OPEN | 8 | 7 |
| 200 – 210 | 185 | OPEN | 8 | 6 |
| 210 – 220 | 195 | OPEN | 7 | 5 |
| 220 – 230 | 205 | OPEN | 6 | 4 |
| 230 – 240 | 215 | OPEN | 6 | 3 |
| 240 – 250 | 225 | OPEN | 5 | 3 |
– Tune: C20 R20
– The TTX2Air comes with a 8,000mm3 volume reducer in the air canister.
– For more information on the TTX2Air.
THE PUSH ELEVENSIX SHOCK
The PUSH ELEVENSIX has been specifically tuned to suit the kinematics and riding intent of the Druid. For full details on this shock as well as useful setup guides, please follow the link to the PUSH website.
THE FOX ELITE 36 GRIP2 FORK
Arguably one of the best forks in its class, the Grip2 damper and the 150mm travel Fox 36 chassis are a heady combination for the trails the Druid was designed for. As per your rear shock, correctly setting up your forks is paramount to optimize performance on the trail. Let’s get started.
STEP 1
To set the sag, push the o-ring to the bottom of the stanchion and carefully get on the bike without moving around too much – it might help to lean against something and get into a stood up riding position. Upon measuring the sag (indicated by the o-ring’s position), Fox recommends 15-20% sag (22-30mm of stanchion insertion). Please adjust accordingly and refer to the chart below for Fox’s recommended starting point for PSI – always cycle the fork through its travel a few times whenever a change is made to the air pressure.
STEP 2
Before further adjustment can be made, turn all compression and rebound adjusters to closed (full clockwise) position. The recommended settings are counted from the closed position [as the starting point]. Please refer to the chart below and note that these are Fox’s base settings and a great starting point prior to making further incremental adjustments to suit individual tastes and needs.
Please also note that both compression settings are based on rider preference, but that both rebound settings are air pressure dependent and may need to be adjusted if the PSI is adjusted.
| Rider Weight (lbs) | FLOAT Pressure (psi) | HSC | LSC | LSR | HSR |
| 120-130 | 66 | 5 | 10 | 9 | 8 |
| 130-140 | 70 | 5 | 10 | 8 | 7 |
| 140-150 | 74 | 5 | 10 | 7 | 6 |
| 150-160 | 78 | 5 | 10 | 7 | 6 |
| 160-170 | 82 | 5 | 10 | 6 | 5 |
| 170-180 | 86 | 5 | 10 | 6 | 5 |
| 180-190 | 89 | 5 | 10 | 5 | 4 |
| 190-200 | 94 | 5 | 10 | 4 | 3 |
| 200-210 | 99 | 5 | 10 | 4 | 3 |
| 210-220 | 105 | 5 | 10 | 3 | 2 |
| 220-230 | 109 | 5 | 10 | 2 | 1 |
| 230-240 | 113 | 5 | 10 | 2 | 1 |
| 240-250 | 117 | 5 | 10 | 1 | 0 |
*The Fox 36 comes with two volume spacers installed in the air sleeve.
*For more information on the Fox 36 fork.
